Installing EON

From comma wiki
Revision as of 03:50, 24 April 2018 by Lordricky (talk | contribs)

Jump to: navigation, search

For installation in a Honda, see this tutorial video to find out correct placement and installation with a panda and giraffe.

For installation in a Toyota, see this instruction video.

  1. Select the correct angled mounting plate adapter.
    1. The EON comes with a 22 degree GoPro style mounting bracket installed (for sedans and coupes and other cars with a shallow angled windshield) and a 28 degree mount in the box (for cars with a steeper angle windshield like SUVs and vans). Use the included allen wrench to change mounting brackets.
    2. You can estimate by using the level functionality of your compass app on your phone with your car parked on a flat surface. It doesn't have to be exact but pick the one closer to your windshield angle.
  2. Mount the EON adapter.
    1. You want the inner edge of the fan closest to the usb port to be directly underneath the stock LKAS camera. This ensure that the road facing camera has a good view of the road and that the driver facing camera has the driver's face in view (driver monitoring features are coming!).
    2. If you are installing with the Giraffe and Panda, install the Giraffe and Panda first and ensure that the USB can reach the Panda
    3. The previous preferred mount was to remove the mirror and mount the EON/NEO directly to the mirror mount. However, EONs now come with the sticky GoPro mount. The instructions below will give you a good chance of installing a windshield mount level and straight:
    4. Experiments have revealed that the most important mounting aspect is the rotation (or roll) of the windshield mount. This method has repeatedly worked well:
      1. Park between two street lines (for instance: inside the yellow turn lane on a low-traffic street) Then put the car in drive with the parking brake on, and foot on the break.
      2. Adjust the lanes until they look centered on the EON.
      3. Rotate the EON until the path line is perfectly vertical between the lines.
    5. If you prefer a Mirror Mount, here is a 3d printable STL file for a Honda Rearview Mirror Mount to GoPro adapter (may fit other cars too)

Consider following the Gridded UI wiki for precise EON placement.

Next, see Running ChffrPlus on the EON or Installing OpenPilot on the EON